Bungs are welded into tubing to create suspension and setting links.  Thread size 3/4" - 16. For use on tubing with a 1" ID. Left threaded parts are identified by machined groove (not shown).

Bungs are welded into tubing to create suspension and setting links.  Thread size 3/4" - 16. For use on tubing with a 1" ID. Left threaded parts are identified by machined groove (not shown).

Bungs are welded into tubing to create suspension and setting links.  Thread size 7/8" - 14. For use on tubing with a 1" ID. Left threaded parts are identified by machined groove (shown in photo).

Bungs are welded into tubing to create suspension and setting links.  Thread size 7/8" - 14. For use on tubing with a 1" ID. Left threaded parts are identified by machined groove (shown in photo).

Bungs are welded into tubing to create suspension and setting links.  Thread size 1" - 14. For use on tubing with a 1.5" ID. Left threaded parts are identified by machined groove, (not shown).

Bungs are welded into tubing to create suspension and setting links.  Thread size 1.25 - 12. For use on tubing with a 1.5" ID. Left threaded parts are identified by machined groove, (not shown).

Bungs are welded into tubing to create suspension and setting links.  Thread size 1" - 14. For use on tubing with a 1.5" ID. Left threaded parts are identified by machined groove, (not shown).

Bungs are welded into tubing to create suspension and setting links.  Thread size 1.25 - 12. For use on tubing with a 1.5" ID. Left threaded parts are identified by machined groove, (not shown).

Flop your rig and not spill your beer!

Now you can stop worrying about spilling your drink and concentrate on the road, crawling over even the most extreme trails.

A draw string helps hold anything from glass and plastic bottles to soda cans.

Made of durable plastic. Mounts to any flat surface. All hardware is included.

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

Laser cut from 6mm steel plate this kit self jigs for easy installation and is designed to mount to 1.75" tube and is large enough to take a creeper joint or johnny joint with a 9/16 bolt.

Brackets are set at 30 degrees for a total of 60 degrees

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

This weld together kit combines a coil mount with retainer, lower link mount and a shock mount all in one bracket.

Laser cut from 6mm steel, this kit is keyed to self jig for easy installation

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

Super strong 10mm thick steel plate

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

48mmx60mmx6mm thick

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

38mm x 64mm x 6mm thick

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

38mm x 45mm x 6mm thick

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

Designed to fit a variety of axle tube sizes.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

Cut from 6mm steel curved to fit around 1.75" Tubing

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

4.5" x 4.5" Cut from 6mm steel

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

4.5" x 4.5" cut from 6 mm steel

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

4.5" x 4.5" cut from 6mm steel

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

4.5" x 4.5" Cut from 6mm steel

Save yourself time and money when building your custom rig with our range of tabs and brackets.

All tabs and brackets are laser cut from quality steel ensuring precision fit up and superior strength.

Tabs and brackets are shipped unpainted, lightly oiled and shrink wrapped to prevent against corrosion.

55mm x 55mm x 5mm thick

]]> chris@offroadgear.com.au (Locktup4x4) http://rani.instanthosting.com.au/~loc48308/index.php?main_page=product_info&products_id=448 Sat, 04 Apr 2009 20:42:26 +1000 16.00 AUD 448 3HOLE http://rani.instanthosting.com.au/~loc48308/images/3holegusset.jpg http://rani.instanthosting.com.au/~loc48308/index.php?main_page=product_info&products_id=447 http://rani.instanthosting.com.au/~loc48308/index.php?main_page=product_reviews&products_id=447

Nitro Gear Ring and Pinion Set in 5.29:1 Ratio

Nitro Gear & Axle strives to provide the highest quality differential components available.  We take the steps necessary to esure our parts are dependable.  Our product range is continually growing to meet the needs of consumers for new ratios and applications.  At Nitro we know differentials, and know what it takes to provide you with high quality components.

Nitro Gear Ring 9.5" Ring and Pinion set in 4.56:1 Ratio

Nitro Gear & Axle strives to provide the highest quality differential components available.  We take the steps necessary to esure our parts are dependable.  Our product range is continually growing to meet the needs of consumers for new ratios and applications.  At Nitro we know differentials, and know what it takes to provide you with high quality components.

Nitro Gear Ring and Pinion Set in 4.88:1 Ratio

Nitro Gear & Axle strives to provide the highest quality differential components available.  We take the steps necessary to esure our parts are dependable.  Our product range is continually growing to meet the needs of consumers for new ratios and applications.  At Nitro we know differentials, and know what it takes to provide you with high quality components.

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

fits 90 & older fj40 fj60 fj62 fj55 bj40 etc w/ ARB Air locker. 9.5" rear, Includes Pinion and Carrier Bearings, Pinion Seal, Pinion depth shims, Pinion Nut, Crush Sleeve, Gear Marking Compound, Loctite, and Brush.

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

fits 90 & older fj40 fj60 fj62 fj55 bj40 etc w/ ARB Air locker. 9.5" rear, Includes Pinion and Carrier Bearings, Pinion Seal, Pinion depth shims, Pinion Nut, Crush Sleeve, Gear Marking Compound, Loctite, and Brush.

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

fits 90 & older fj40 fj60 fj62 fj55 bj40 etc w/ ARB Air locker. 9.5" rear, Includes Pinion and Carrier Bearings, Pinion Seal, Pinion depth shims, Pinion Nut, Crush Sleeve, Gear Marking Compound, Loctite, and Brush.

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Master Install Kit, FITS ALL 90 & Older Toyota Land Cruiser 9.5" Rear, Includes Pinion and Carrier Bearings, Pinion Seal, Pinion depth shims, Pinion Nut, Crush Sleeve, Silicone, Gear Marking Compound, Loctite, and Brush. Mini Install Kit, Toyota Landcruiser 9.5", Includes Shims, Crush Sleeve, Pinion Seal, Pinion Nut, Marking Compound. FITS FRONT & REAR LAND CRUISER 9.5" DIFF, FJ40, BJ40, FJ45, FJ55, FJ60, FJ62, HJ60, BJ60, BJ70, HZJ75, PZJ70, BJ74 ETC

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Master Install Kit, FITS ALL 90 & Older Toyota Land Cruiser 9.5" Rear, Includes Pinion and Carrier Bearings, Pinion Seal, Pinion depth shims, Pinion Nut, Crush Sleeve, Silicone, Gear Marking Compound, Loctite, and Brush. Mini Install Kit, Toyota Landcruiser 9.5", Includes Shims, Crush Sleeve, Pinion Seal, Pinion Nut, Marking Compound. FITS FRONT & REAR LAND CRUISER 9.5" DIFF, FJ40, BJ40, FJ45, FJ55, FJ60, FJ62, HJ60, BJ60, BJ70, HZJ75, PZJ70, BJ74 ETC

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Master Install Kit, FITS ALL 90 & Older Toyota Land Cruiser 9.5" Rear, Includes Pinion and Carrier Bearings, Pinion Seal, Pinion depth shims, Pinion Nut, Crush Sleeve, Silicone, Gear Marking Compound, Loctite, and Brush. Mini Install Kit, Toyota Landcruiser 9.5", Includes Shims, Crush Sleeve, Pinion Seal, Pinion Nut, Marking Compound. FITS FRONT & REAR LAND CRUISER 9.5" DIFF, FJ40, BJ40, FJ45, FJ55, FJ60, FJ62, HJ60, BJ60, BJ70, HZJ75, PZJ70, BJ74 ETC

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Master intall kits-

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Fits 4 Pinion 8" Rear Diffs

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Mini installation kits use only the highest quality components available. Our Minikits provide you the minimum parts you need to set up a differential, most include:

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Nitro Master installation kits use only the highest quality components available.  Our Master kits are more than just a bearing & seal kit and most include:

-High quality Timken or Koyo Pinion & Carrier bearings

-Pinion Seal

-Pinion Nut

-Crush Sleeve (where applicable)

-Pinion shims & Carrier Shims (where applicable)

-Ring gear Bolts (where applicable)

-Loctite

-Marking Compound & brush

Our “Rock Monster” series  4.9:1 transfer case gears are designed for the less extreme multi-purpose off-roader who requires versatility for all types of terrain from mud to rocks ,we have a 4.9:1 reduction gear set. These provide 115% reduction in low range and 16% reduction in high range. These one-piece billet gear sets run QUIET and provide superior reliability. These are the most complete kits currently available and include new gaskets, seals, thrust washers, counter shaft, 2 needle bearings, an O-ring, and even a new shift sheet. NO CORES REQUIRED!!!

***Mighty Kong transfer case mount is recommended with these super-low gears.

4.9:1 - 115% reduction

Trail Tough's economical 4.16:1 gear set. 84% low range reduction, 12% high range reduction. A must when using larger tires.

**Mighty Kong transfer case mount recommended with these lower gears**

Crawler Kit - includes gears, seals, gaskets, and shift sheet